Many people are unsure how to choose a solid wood door, unsure of the materials used or the details that indicate quality. Some buy doors simply because they look good, only to find they've warped. Therefore, good solid wood doors have quality standards. Understanding these standards is crucial for future selection.
The wood used for solid wood doors typically requires drying. The moisture content should be below 12%. Inadequate drying can lead to warping, cracking at joints, and shrinkage of the core panel. Material standards are similar to other wood products. Processing should be meticulous, free of mold, burrs, and rough edges. For semi-glass and fully glass doors, the glass frames should be accurately finished with clean edges.
The quality standards for solid wood doors are as follows: the door leaf should be fully filled; the planed wood strips along the door edges should be firmly connected to the inner frame; the horizontal and vertical ribs of the inner frame should be arranged according to design requirements; there should be horizontal ribs at the hinge installation points; the decorative panel should be firmly bonded to the frame, without warping or cracks; the panel surface should be flat, clean, and free of knots, wormholes, cracks, and rot spots; the wood grain should be clear and aesthetically pleasing. The panel thickness should not be less than 3 mm.
